As the world’s first e-liquid vaporizer with water filter installation, the H Legend 3 is powered by single 18650 battery, thus, it is portable and durable. What is more, with the atomizer, the device can support e-liquid burning. After the smoke goes through the water installations, the tar and other hazardous chemicals are filtered, thus, you can get a more pure and different taste and a healthier experience as well.
Battery type: single 18650 battery ( not included )
Replaceable 0.5 ohm coil head, long lifetime
Adjustable three voltage modes: 3.7V, 3.9V, 4.2V
Constant voltage output: the device will be all-watt output when the set-up voltage is below the current voltage
Glass atomizer with airflow holes
Filter tar and other hazardous chemicals
Can take out or leave the battery stay in the device when charging
Smart, light and portable
Anti-leak silicone ring
Resistance: 0.2 – 3.0 ohm
Material: stainless steel and glass
Threaded battery cover
After the battery loaded, the button will flash in white 3 times and then the device enters power saving mode
LED light will show on each voltage mode: set up the voltage at 3.7V, the LED light flashes in red; at 3.9V, flashes in green; at 4.2V, flashes in blue constantly. The button LED will be off when the button switched off and the system stops output
Voltage modes adjustment: press the button 3 times continuously within 3s to adjust the voltage modes
Lock / unlock: press the button 5 times continuously within 3s to lock / unlock the device, and the light will flash in white 3 times
Low voltage protection: the button LED will flash in red 8 times to indicate that the battery should be charged when the working voltage is below 3.3V.
Short-circuit protection: the device will alter when the output terminal short-circuited and the button LED will flash in white 3 times. At this time, the device does not work.
Overtime use protection: long button press each time, the device can only work for 20s. After 20s. the button LED will flash 10 times to indicate overtime use and the system will stop work. After the button light stop flashing it can be switched on to work again.
Battery reverse protection: the device will not work when battery loaded reversely.
Low resistance protection: the button LED will flash in white 5 times when the device works bellow 0.2 ohm. Meanwhile, the whole system will cut off and stop output.
Charging input voltage: DC5V
Charging current: 1000mA
When inserting the charger, the button LED will flash in red 5 times to indicate that it is charged successfully. And the LED light keeps in red during charging.
When the device is in full charge, it will stop charging, and the white light will stay on all the time.
1. Please do not over time use the device for 5 times continuously.
2. The device must be put 60 degrees higher than the horizontal angle when vaping.
3. Turn the mouth piece clockwise to open the airway when vaping, turn the mouth piece counterclockwise to close airway when not vaping.
4. After injecting water, the device should be put flatly, do not place it upside down.
| Brand: Beyang |
Atomizer Resistance: 0.5 ohm
Battery Cover Type: Screwed
Battery Form Factor: 18650
Battery Quantity: 1pc ( not included )
Connection Threading of Atomizer: 510
Connection Threading of Battery: 510
Material: Glass,Stainless Steel
Model: H Legend 3
Dimension and Weight
| Package size (L x W x H): 15.00 x 10.00 x 6.00 cm / 5.91 x 3.94 x 2.36 inches |
Package weight: 0.420 kg
Product size (L x W x H): 3.30 x 3.30 x 21.50 cm / 1.3 x 1.3 x 8.46 inches
Product weight: 0.213 kg
|Package Contents: 1 x Beyang H legend 3 Electronic Hookah, 1 x USB Cable, 1 x English User Manual, 1 x Brush, 8 x Insulated Ring, 1 x Mouthpiece Protective Jacket, 1 x Leakage Protection Plug|